Remote Operation; Remote Access Code - Panasonic KX-TG7301E Operating Instructions Manual

TG7301-7321E(e).book Page 33 Thursday, February 14, 2008 9:26 AM
Erasing all messages
1
K (middle soft key)
2
{V}/{^}: "Answer System" i
M
3
{V}/{^}: "Erase Message" i
M
4
{V}/{^}: "Erase All" i M
5
{V}/{^}: "Yes" i M i {ih}
Calling back (Caller ID
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1
Press K during playback.
2
{V}/{^}: "Call Back" i M
Editing the number before calling
back
1
Press K during playback.
2
{V}/{^}: "Edit and Call" i
M
3
Edit the number. i {C}

Remote operation

Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit's voice guidance prompts you to
press certain dial keys to perform
different operations.

Remote access code

A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Answering System
unauthorised parties from listening to
your messages remotely.
Important:
L In order to operate the answering
system remotely, you must first set a
remote access code.
1
K (middle soft key)
2
{V}/{^}: "Answer System" i
M
3
{V}/{^}: "Settings" i M
4
{V}/{^}: "Remote Code" i M
5
To turn on remote operation, enter
the desired 3-digit remote access
code.
L To turn off remote operation,
press {*}.
6
M i {ih}
Using the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
After the greeting message starts,
enter your remote access code.
L The unit announces the number of
new messages.
3
Follow the voice guidance prompts
as necessary or control the unit
using remote commands (page 34).
4
When finished, hang up.
Voice guidance
During remote operation, the unit's voice
guidance starts and prompts you to
press {1} to perform a specific
operation, or press {2} to listen to more
available operations.
33