Battery Installation And Replacement - Panasonic KX-TG7301E Operating Instructions Manual

TG7301-7321E(e).book Page 14 Thursday, February 14, 2008 9:26 AM
Preparation
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a T-
adaptor. Your Panasonic sales shop can
offer you more information about
connection possibilities.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
To telephone line
DSL/ADSL filter
Battery installation and
replacement
Important:
L Use the supplied rechargeable
batteries (Part No. HHR-55AAAB).
L When installing the batteries:
14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Confirm correct polarities (S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 5, 8.
1
Firmly press the notch on the
handset cover and slide it in the
direction of the arrow.
2
Insert the batteries negative (T)
end first. Close the handset cover.
Rechargeable Ni-MH ONLY
Important:
L If the handset does not automatically
turn on after installing/replacing
batteries, press {ih} for about 1
second, or place the handset on the
base unit or charger.