Labeling An Input Source; Using Inlink; Turning Inlink On Or Off - Insignia NS-32DD200NA14 User Manual

Insignia 32" LED TV/DVD Combo

Labeling an input source

You can add a label to an input source to make it
easier to identify.
To label an input source:
1 Press TV-MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or OK. The SETTINGS menu opens.
3 Press or to highlight Input Labels, then
press OK. The SETTINGS · INPUT LABELS screen
opens with the input source field highlighted.
4 Press or to select the input source you want
to label, then press
5 Press or to select a character, then press
or to move to the previous or next character
position. Repeat this step to enter additional
characters.
6 When you have completed the label, press OK.
7 Press TV-MENU to return to save your label and
return to the previous menu. The next time you
press INPUT, your label will appear in the INPUT
SOURCE list.
8 Press EXIT to close the menu.
to move to the label field.
www.insigniaproducts.com

Using INlink

INlink lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use INlink, you must set the INlink Control setting
on the SETTINGS-INlink menu to On.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
• The connected device's HDMI CEC feature
must be turned on.
• If you connect an HDMI device that is not
HDMI CEC-compatible, all of the INlink
Control features do not work.
• Depending on the connected HDMI
device, the INlink Control feature may
not work.

Turning INlink on or off

To turn INlink on or off:
1 Press TV-MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or OK. The SETTINGS menu opens.
3 Press or to highlight INlink, then press OK.
The SETTINGS · INlink menu opens.
4 Press or to highlight INlink Control, then
press OK.
5 Press or to highlight On or Off, then press
OK.
6 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
60