Using Component Video (Better) - Insignia NS-32DD200NA14 User Manual

32" led tv/dvd combo
Hide thumbs Also See for NS-32DD200NA14:
Table of Contents

Advertisement

Insignia 32" LED TV/DVD Combo

Using component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component
Analog
video cable
audio cable
connectors
connectors
Component
Analog
video jacks
audio jacks
To connect a cable or satellite box using component video:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y, P
jacks on the side of your TV and the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and R AUDIO jacks on the side of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
• The COMPONENT IN/AV IN VIDEO/Y, P
• When you connect the audio using the L and R AUDIO jacks, the audio
5 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
or
to highlight Component/AV, then press OK.
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite
device).
output is analog.
www.insigniaproducts.com
Audio cable
Component video
cable
Cable or
satellite box
, and P
video jacks (used to
B
R
Side of TV
, and P
B
video
R
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents