Using Component Video (Better) - Insignia NS-32DD200NA14 User Manual

Insignia 32" LED TV/DVD Combo

Using component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Analog audio
video cable cable
connectors connectors
Component Analog
video jacks audio jacks
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y, P
the side of your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the L and R AUDIO jacks on the side of your TV and to the L and R
AUDIO OUT jacks on the DVD or Blu-ray player.
Notes
• The COMPONENT IN/AV IN VIDEO/Y, P
• When you connect the audio using the L and R AUDIO jacks, the audio
4 Plug your TV's power cord into a power outlet, then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to select Component/AV, then press OK.
DVD or Blu-ray player
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite
device).
output is analog.
www.insigniaproducts.com
Audio cable
Component
video cable
, and P video jacks (used to
B R
Side of TV
, and P
B
jacks on
R
20