Using The Power Switch - Panasonic CF-Y4 Reference Manual

Standby/Hibernation Functions

Using the Power Switch

At the time of purchase, the computer is set so that hibernation mode can be used.
Setting
1
Click [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2
Click [Stand by] or [Hibernate] for [When I press the power button on
my computer], and then click [OK].
Entering the standby or hibernation mode
1
Slide the power switch (A); release your finger at the beep
The computer will enter either the standby or hibernation mode, depending on the
setting.
CAUTION
After releasing your finger from the power switch, do not touch it until the power
indicator goes off or blinks.
*1
At the beep sound, release your finger from the power switch. If you continue to
slide the power switch and hold it for more than four seconds, the computer will emit a
*1
second beep then power off. Data not previously saved will be lost.
Even when [When I press the power button on my computer] is set to [Shut down]
with [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] -
[Advanced], if you slide the power switch for more than four seconds and do not
release it, a second beep
not previously saved will be lost.
*1
When the speaker function is disabled, e.g., by the key combination the
no beep sound. By the key combination the
*1
will sound and the power will be turned off forcibly. Data
Fn F5
+ key, there will be lower beep sound.
47
*1
sound.
Fn F4
+ key, there will be