Using The Power Switch - Panasonic CF-R1 Series Reference Manual

Standby/Hibernation Functions

Using the Power Switch

Setting
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced].
2 Select [Standby] or [Hibernate] for [When I press the power button on my com-
puter] and then select [OK].
Windows XP
1 Select [start] - [Control Panel] - [Performance and Maintenance] - [Power Options]
- [Advanced].
2 Select [Stand by] or [Hibernate] for [When I press the power button on my com-
puter], then select [OK].
Shutting down
CAUTION
After releasing your finger from the power switch, do not touch the power
switch until the power indicator goes off or blinks.
At the "beep*" sound, release your finger from the power switch. If you con-
tinue to slide the switch and hold it for more than four seconds, the computer
will emit a second "beep*" then power off. Data not previously saved will be
lost.
Windows 2000
Even when [When I press the power button on my computer] is set to [Power
Off] with [Start] - [Settings] - [Control Panel] - [Power Options] - [Advanced], if
you slide the power switch for more than four seconds and do not release it, a
second "beep*" will sound and the computer will be turned off forcibly. Data
not previously saved will be lost.
Windows XP
Even when [When I press the power button on my computer] is set to [Shut
down] with [start] - [Control Panel] - [Performance and Maintenance] - [Power
Options] - [Advanced], if you slide the power switch for more than four sec-
onds and do not release it, a second "beep*" will sound and the computer will
be turned off forcibly. Data not previously saved will be lost.
* When the speaker function is disabled, e.g., by the key combination Fn + F4 , there will
be no beep sound.
Slide the power switch; at the "Beep*" sound,
release your finger
The computer will enter either the standby or hiberna-
tion mode, depending on the setting.
14