Onboard Fdc Controller - SOYO ATX 12V User Manual

BIOS Setup Utility
Others Optional
Setting
Password
POWER ON
Function
Hot KEY
Mouse Move
Mouse Click
Any KEY
BUTTON-ONLY Disables the Wake-Up by
Keyboard 98
If [POWER ON Function] is set to [Password]
KB Power ON Enter (your
Password password)
If [POWER ON Function] is set to [Hot Key]
Hot Key Power Ctrl-F1~F12
ON

Onboard FDC controller

Onboard FDC
controller
Onboard Serial Ports
Onboard
Serial Port 1 /
Serial Port 2
Description
Enables you to wake-up the
system by entering a password
on the keyboard.
You can wake-up the system by
pressing the key combination of
your choice (Ctrl-F1~F12).
Enables waking up the system by
pressing either the right or left
mouse button.
Keyboard function.
Allows you to power on a system
using this type or keyboard.
Set the password that will wake-up your
system.
Choose the key combination that will
wake-up the system. [Ctrl-F1 to Ctrl-F12]
Setting
Disabled
Enabled
Setting Description
Disabled
3F8/IRQ4 Choose serial port 1 & 2's I/O
address.
Do not set port 1 & 2 to the
2F8/IRQ3
same setting except for Disabled
or Auto.
3E8/IRQ4
2E8/IRQ3
Auto
SY- P4I865PE Plus DRAGON 2
Description
Turn off the on-board
floppy controller
Use the on-board floppy
controller
68
Note
Default
Note
Default
Note
Default
(port 1)
Default
(port 2)