Step 5 Power On - SOYO ATX 12V User Manual

Hardware Installation
Onboard LAN LED Definition
When this LED is lit, this
means the
running at 100 mbps, if it
is not lit, the Onboard
LAN is working at 10
mbps.

Step 5 Power On

You have now completed the hardware installation of your Motherboard
successfully.
1. Turn the power on
2. To enter the BIOS Setup Utility, press the <DEL> key while the system is
performing the diagnostic checks,
Note: If you have failed to enter the BIOS, wait until the boot up
sequence is completed. Then push the RESET button and press
<DEL> key again at the beginning of boot-up, during diagnostic
checks.
LAN is
SY- P4I865PE Plus DRAGON 2
38
This is the LAN activity
LED. It will blink when
it is active.