Receiving Faxes - Epson WORKFORCE WORKFORCE 630 Quick Manual

■
If you've connected a telephone to the product, dial the number from the
phone. Select
Note:
Don't hang up the phone until you begin transmitting the fax.

Receiving Faxes

Before receiving faxes, make sure you load plain paper and select the correct
settings for the paper you've loaded.
1. Press the
2. Press x
3. Select
Paper Size
loaded.
Note:
If the incoming fax is larger than the paper you loaded, it is reduced to fit or printed
on multiple pages, depending on the Auto Reduction setting you select.
4. Press x
To receive faxes automatically, press the
button to turn on the
Note:
To change the number of rings before the product answers,
see page 20.
If you run out of paper during printing, you see an error
message. Load more paper and press the
button to continue.
x Start
To receive faxes manually, turn off the
1. When your telephone rings, lift the phone off the hook.
2. Select
Receive
3. After all the pages are received, replace the phone on the hook.
4. Press
OK
22
Receiving Faxes
, then press the
Send
button.
Fax
and select
Menu Fax Print Settings
and make sure the setting matches the size of paper you
when done.
Menu
Auto Answer
, then press the
to print the fax.
or
B&W Color x Start
.
Auto Answer
light.
or
B&W Color
Auto Answer
or
B&W Color x Start
button.
Auto Answer light
light and follow these steps:
button.