Sending A Fax From The Control Panel - Epson WORKFORCE WORKFORCE 630 Quick Manual

Sending a Fax From the Control Panel

You can send a fax by manually entering a fax number, as described below.
Note:
To dial the number using a telephone, by redialing, or by selecting from your speed dial
list, see the next section. To send a fax from your computer using the Epson FAX Utility,
see your online User's Guide.
1. Press the
Fax
2. Place your original(s) for faxing (see page 8).
Note:
To scan a two-sided document (WorkForce 635 only), press the
and select On.
3. Use the numeric keypad to enter the fax number. You can enter up to 64
digits.
4. To change fax settings, press x
5. Press the
B&W
Note:
If the recipient's fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
■
If you are scanning with the Automatic Document Feeder, your
document is automatically scanned and faxed.
■
If you place your document on the scanner glass, you can scan additional
pages after the first one is sent.
■
If the fax number is busy, you see a redialing message and the product
redials after one minute. To redial immediately, press
To cancel faxing, press y
Other Ways to Dial a Fax Number
Here are some other ways you can dial a fax number:
■
Redial/Pause
■
: Select or type the number of the speed dial entry and press
Speed Dial
To use a group dial entry, press the
button.
or
Color x Start
at any time.
Stop
: Redial the last fax number you used.
and select settings as necessary.
Menu
button to send your fax.
Speed Dial
Sending a Fax From the Control Panel
2-Sided button
Redial/Pause
button twice.
.
.
OK
21