Table of Contents
Advertisement
Viewing Video
The chartplotter can show video if you are connected to one or more video sources using the
supplied video cable. A GPSMAP 7015 or 7215 chartplotter can also display real-time data from a
PC if the chartplotter is connected to the PC through the VGA input port
6000/7000 Series Installation Instructions for details.
From the Home screen, select
Selecting a Video Source
1. From the Home screen, select
2. Select Source.
3. Indicate the source of the video feed:
•
For the GPSMAP 6008, 6208, 6012, 6212, 7012, or 7212, select
video input. For the GPSMAP 7015 or 7215, select
•
For the GPSMAP 7015 or 7215, select
•
For the GPSMAP 7015 or 7215, select
chartplotter display mimics the appearance of a computer monitor, and does not contain
Home, Mark, or Menu buttons.
•
For the GPSMAP 7015 or 7215, select
simultaneously.
Configuring the Video Appearance
Before you can configure the video appearance, you must set the video Source setting to S-Video,
Video 1, Video 2, Video 3, Video 4, or Quad Video
1. From the Home screen, select
2. Complete an action:
•
Select
Aspect
>
stretched beyond the dimensions provided by the connected video device, and it may not fill
the entire screen.
•
Select
Aspect
>
•
Select Brightness. Select Up, Down, or Auto.
Saturation
•
Select
•
Select Contrast. Select Up, Down, or Auto.
•
Select Standard. Select the source format of the video (PAL or NtSC). Select
the chartplotter to select the source format automatically.
Alternating Among Multiple Video Sources
If you have two or more video sources, you can alternate between them using a specific time
interval.
1. From the Home screen, select
2. Select the amount of time each video appears.
GPSMAP
6000/7000 Series Owner's Manual
®
Information
Information
Information
Stretch
to show the video using a stretched aspect ratio. The video cannot be
Standard
to show the video using a standard aspect ratio.
to adjust the color saturation. Select Up, Down, or Auto.
Information
Almanac, Environmental, and On-boat Data
> Video.
>
Video
> Menu.
Video
1,
S-Video
if you are using an S-Video connector.
VGA Input
to display real-time data from a PC. The
Quad Video
to display four RCA video inputs
(page
55).
Video
> Menu.
>
Video
Menu
Source
>
>
>
(page
2). See the GPSMAP
Video 1
Video 2
or
Video
2,
Video
3, or
Video
Auto
Alternate
>
to display
4.
to allow
Hide quick links:
Advertisement
Table of Contents
