Showing Satellite Imagery On The Navigation Chart - Garmin GPSMAP 190-01120-00 Owner's Manual

Fishing Chart
The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision data
card, and is best for offshore deep-sea fishing.
Fishing Chart Appearance
Using Waypoints
See "Waypoints" (page
Using Tracks
See "Tracks" (page
Showing Other Vessels
See "Configuring the Appearance of Other Vessels"
Showing Navaids
From the Home screen, select
Showing Data Bars
See "Data Bars" (page

Showing Satellite Imagery on the Navigation Chart

You can overlay high-resolution satellite images on the land, on the sea, or on both portions of the
Navigation chart when using a preprogrammed BlueChart g2 Vision data card.
Note: When enabled, the high-resolution satellite images are only present at lower zoom levels.
If you cannot see the high-resolution images in your BlueChart g2 Vision region, you can zoom in
further by selecting the
series). You also can set the detail level higher by changing the map zoom detail
1. From the Home screen, select
2. Complete an action:
Land only
• Select
the land.
• Select Photo Map
Up
and hold or
the satellite photos cover both land and water.
GPSMAP 6000/7000 Series Owner's Manual
®
34).
39).
Charts Fishing Chart
>
62).
Range
(+) key (GPSMAP 6000 series) or the
Navigation Chart
to show standard chart information on the water, with photos overlaying
to show photos on both the water and the land at a specified opacity. Select
Down
to adjust the photo opacity. The higher you set the percentage, the more
Navigation Chart
(page 66).
Menu Navaids
> >
button (GPSMAP 7000
> Menu > Chart Setup
Charts and 3D Chart Views
> on.
(page 11).
> Photos.