Entone Hydra HD A-Series User Manual page 36

Hydra HD – A Series User's Guide
5. If the Hydra HD does not receive any remote control registration event within 30 seconds, the process
will be terminated.
The Hydra HD front panel displays the following messages during remote control registration:
Table 10-1 Remote Registration Messages
RC REG TO
RC REGERR
RC REG
RC REGEND
RC REG D1
RC REG D2
RC REG D3
Here are some principles of the remote registration method:
Each decoder allows a maximum of 3 remote controls to be registered and a registration list is
maintained. If the user has registered 3 remote controls and tries to register another remote control, the
first registered remote control will be removed from the registration list. This works as a first-in-first-out
fashion.
Each remote control can only be registered for one decoder. If user tries to register a remote control
which is already registered to another decoder, that remote registration will be removed from the
original registration list.
The registration list is maintained in order. If the secondly registered remote control is removed from the
list, the third entry will move forth to the second and the third will be blank for a new remote control to
be registered.
Registration times out
Registration error
In registration mode
Registered to IR only mode
Registered to decoder 1
Registered to decoder 2
Registered to decoder 3
Copyright © © © © 2008 Entone, Inc. All rights reserved
.