Entone Hydra HD A-Series User Manual page 20

Hydra HD – A Series User's Guide
1. Acquire the required cable. Component cable comes packaged with the Hydra HD. HDMI cable is not
packaged with the Hydra HD. Before purchasing the cable, consult your TV owner's manual to confirm
that your TV supports the video signal output that you plan to use.
2. Connect the video and audio cables to the Hydra HD. (HDMI does not require separate audio cable
connection.)
3. Connect the opposite end of the video and audio cables to the matching input in the TV.
4. Plug in your TV and turn on the power using your TV remote control. Use your TV remote control to
select the respective video input that has connected to the Hydra HD. Consult your TV owner's manual
for instructions as required.
5. Plug in your Hydra HD and turn on the power.
6. You should now see the output from the Hydra HD on your TV screen.
Figure 4-4 Connecting Primary TV using Component and Composite Audio
Copyright © © © © 2008 Entone, Inc. All rights reserved
.