If You Cannot Make Copies As You Want - Ricoh LD316D Operating Instructions Manual

If You Cannot Make Copies As You Want

This section explains causes and remedies when copy results are not as expect-
ed.
❖ Basic
Problem
You cannot combine sever-
al functions.
❖ Edit
Problem
When using the Duplex
Margin function, parts of
the original image are not
copied.
❖ Combine
Problem
When using Combine,
parts of the image are not
copied.
Copies are not in correct or-
der.
Causes
Selected functions cannot
be used together.
Causes
You set a wide erased mar-
gin.
There is a lack of margin
space on the opposite side
of the binding position.
Causes
You specified a reproduc-
tion ratio that does not
match the sizes of your
originals and copy paper.
Your originals are not iden-
tical in size and direction.
You placed the originals in
the incorrect order.
If You Cannot Make Copies As You Want
Solutions
Check the combination of functions
and make the settings again.
Reference
p.63 "Combination Chart"
Solutions
Set a narrower margin with User
Tools. You can set the width be-
tween 0–50 mm (0"–2"). See p.55
"Duplex Margin".
Solutions
When you specify a reproduction
ratio using the Manual Paper Select
function, make sure the ratio match-
es your originals and the copy pa-
per.
Note
❒ Select the correct reproduction
ratio before using the Combine
function.
Use originals that are identical in
size and direction.
When placing a stack of originals in
the ADF or ARDF, the last page
should be on the bottom.
If you place an original on the expo-
sure glass, start with the first page to
be copied.
3
43