Using.tracback - Garmin Quest 2 Owner's Manual

Using TracBack
The Quest 2 records an electronic breadcrumb trail or "track log"
as you travel. As a result, you can retrace your recent movements
using the TracBack feature. This feature is particularly useful
®
when navigational markers are not readily available.
The track log starts recording as soon as the Quest 2 gets a
location fix. For the best results, clear the track log before you start
traveling. When the track log is full, new track points overwrite the
oldest track points.
To use TracBack:
1.. Press.the.FIND.key,.highlight.Where Am I?,.and.press.OK..
2.. Highlight.TracBack.and.press.OK..
3.. If.you.want.to.travel.to.the.beginning.of.your.track,.highlight.
Yes.and.press.OK..
. To.select.a.spot.along.your.track.to.travel.to,.highlight.No.
and.press.OK..Use.the.Rocker.to.select.the.point.to.which.
you.want.to.travel.and.press.OK..
Quest 2 Owner's Manual
®
4.. A.TracBack.Preference.window.appears..
Highlight.the.preferred.method.and.press.
OK..
If you have selected to follow roads (Faster Time or Shorter
Distance), the Quest 2 creates a turn-by-turn route to the selected
end point. Follow the route just as you would follow any route.
If you selected to follow the track, you can use the Map page and
the Compass page to guide you along the path. See the next page
for more information about the Compass page.
b o > u t
asIc peratIon sInG rac
b
acK