Turning.the.quest.2.On.and.off - Garmin Quest 2 Owner's Manual

Turning the Quest 2 On and Off
Press and hold the Power
it on or off. When turned on, the Welcome page appears briefly,
followed by a Safe Driving Warning Message. Press the OK key
to acknowledge the message. Your Quest 2 automatically starts
searching for satellite signals to find your current location. The first
time the Quest 2 acquires satellites it may take several minutes.
Afterward, acquisition times are quicker during normal use.
nOtE: If the unit prompts you to enter a security code, contact
your Toyota dealer.
If your unit is in the vehicle mount, it turns on automatically when
you start your vehicle. When you turn off your vehicle, the External
Power Lost message appears. Press any key to switch the unit to
battery power. Otherwise, the Quest 2 turns off after 30 seconds.
Quest 2 Owner's Manual
®
key on the front of the unit to turn
G s
ettInG tarted
Turning Off Satellite Reception for Indoor Use
You can set your Quest 2 to indoor use, which stops satellite
reception and conserves battery power. Thoroughly familiarize
yourself with the routing features of the Quest 2 by
simulating routes.
To turn off satellite reception:
1.. Press.the.Page. .key.to.open.the.Map.page..
2.. Press.the.MeNU.key..
3.. Highlight.Use Indoors and.press.OK..GPS.is.disabled.
To turn on satellite reception:
1.. Press.the.Page. .key.to.open.the.Map.page..
2.. Press.the.MeNU.key..
3.. Highlight.Acquire Satellites and.press.OK..GPS.is.
enabled,.and.your.Quest.2.begins.to.acquire.satellite.
signals.
> t Q 2 o
urnInG the uest n and
o
ff