Viewing The Map Orientation - Garmin Quest 2 Owner's Manual

Viewing the Map Orientation

You can orient the map in one of two ways. north Up shows the
Map page with North always at the top, as if you were reading a
paper map. track Up allows the map to automatically rotate so
your direction of travel always appears at the top of the Map page.
If you are using Track up, a white n indicator, in the top left corner
of the Map page, points to the North.
Your Quest 2 is set to show the Map page in Track Up orientation
until you zoom out to the 200-mile zoom range or above. To
change the map orientation settings, see
Track Up
Quest 2 Owner's Manual
®
page 33.
North Up
Data Fields
The Map page displays data fields on the right-hand column of the
page. Information in these fields changes depending on whether
you are navigating a route or just traveling with the Quest 2 turned
on. Data fields also appear on the Trip Information page
32) and the Compass page (page
description of data field options, see
To change the data fields on the Map page:
1.. Open.the.Map.page.and.press.the.MeNU.key..
2.. Highlight.edit Fields and.press.OK..
3.. Use.the.Rocker to highlight the data field you want to
change.and.press.OK.
4. Highlight the new data field type in the list and press OK..
5. When you are finished changing the data fields, press Page.
.to.exit..
Data fields
u m p > m
sInG the aIn aGes ap
(page
20). For a complete list and
page 45.
p
aGe
2