Using Fm Traffic; Led Blink Codes - Garmin nvi 5000 Owner's Manual

U fM T
sinG
Use an FM TMC (Traffic Message
Channel) traffic receiver to receive
traffic information broadcast over the
FM Radio Data System. For information
about FM traffic receivers and coverage
areas, see www.garmin.com/traffic.
note: Garmin is not responsible
for the accuracy of the traffic
information. The FM traffic
receiver receives signals from the
traffic service provider and shows
that information on your nüvi.
note: The FM traffic receiver
and nüvi must be in data range of
an FM station transmitting TMC
data to receive traffic information.
note: The nüvi must be
connected to the optional FM
traffic receiver to access traffic
information.
nüvi 5000 Owner's Manual
raffic
To the power outlet
in the vehicle
Power
Status
LED
LED
note: If your FM TMC traffic
receiver has an antenna with
suction cups on it, route the
antenna on your windshield
vertically using the suction cups.

LED Blink Codes

The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
• Yellow dot-dash flashes:
determining which country you
are currently in.
• Yellow solid: searching for signal.
• Red solid: momentary sync loss.
• Green solid: normal traffic data.
U fM t
SinG raffic
To the power
connector on the
nüvi cradle
5