Changing The Vehicle; Adding Security; Viewing Fm Tmc Traffic Subscription Information - Garmin Road Tech Zumo 665 Owner's Manual

• Standard View—display two data
fields at the bottom of the screen.
• More Data View—display four
data fields on the right side of the
screen.
• More Map View—display
transparent data fields in the
corners of the screen.
Trip Log—show or hide the log of
your travels. To clear your trip log,
touch Tools > My Data >
Log.
Map Info—view the maps loaded on
your zūmo and their versions. Touch a
map to enable (check mark) or disable
(no check mark) that map.
Restore—restore the original map
settings.
Road Tech zūmo 665 Owner's Manual
™

Changing the Vehicle

Tools
Touch
Selection
to display your position on the map.
Touch the icon you want to use, and
then touch oK. Download additional
vehicle icons at
.com.

adding Security

Tools
Touch
Clear Trip
Garmin Lock—turn on Garmin
Lock to lock your zūmo. Enter a 4-
™
digit PIN, and set a security location.
For more information, see
Safe Mode—turn safe mode on or
off. When your vehicle is moving,
safe mode disables all functions that
require significant operator attention
Settings Vehicle
> >
to change the icon used
www.garmingarage
Settings > Security.
>
page 48.
Customizing the zūmo
and could become a distraction while
driving.
Restore—restore the original security
settings. Restoring the security settings
does not clear your Garmin Lock PIN
or security location.
Viewing FM TMC
Traffic Subscription
Information
NoTe: You can only access the traffic
settings if your zūmo is connected to
external power and an FM TMC traffic
receiver.
Touch Tools > Settings > Traffic.
The traffic settings vary based on the
location you selected as your locale in
the initial setup.
45