Changing The Fuse - Garmin nvi 5000 Owner's Manual

a
PPendix
To change the proximity alert settings,
tools Settings
touch >
points > alerts.
To delete the Custom POIs from
your nüvi, connect your nüvi to your
computer. Open the garmin\poi folder
in the nüvi drive or the SD card drive.
Delete the file entitled poi.gpi.
TourGuide
The TourGuide allows your nüvi to play
third-party, GPS-guided audio tours.
These audio tours can take you on a
route while playing interesting facts
about historical sites along the way. For
more information, go to
.com/extras, and click
To view your TourGuide files, touch
Where to > extras
To change the TourGuide settings, touch
tools > Settings >
tourguide.
0
proximity
>
www.garmin
poi Loader.
> custom pois.
proximity points

Changing the Fuse

caution: When replacing the
fuse, do not lose any of the small
pieces, and make sure they are put
back in the proper place.
If your unit will not turn on in your
vehicle, you may need to replace the fuse
located at the tip of the vehicle adapter.
1. Unscrew the black, round end
piece, and remove it.
2. Remove the
fuse (glass
and silver
cylinder),
and replace
it with a new
3A fast-blow
fuse.
3. Ensure that the silver tip is placed
in the black end piece. Screw on
the black end piece.
>
End piece
Silver tip
Fuse
nüvi 5000 Owner's Manual