Using Fm Traffic; Led Blink Codes - Garmin nuvi 700 series Owner's Manual

U fM t
SinG raffic
U fM T
sinG
Traffic receiver included in some nüvi
710, 750T, 760, 770 packages.
Use an FM TMC (Traffic Message
Channel) traffic receiver to receive
traffic information broadcast over the
FM Radio Data System. For information
about FM traffic receivers and coverage
areas, see www.garmin.com/traffic.
NOTE: Garmin is not responsible
for the accuracy of the traffic
information. The FM traffic
receiver simply receives signals
from the traffic service provider
and shows that information on
your nüvi.
NOTE: The FM traffic receiver
and nüvi must be in data range of
an FM station transmitting TMC
data to receive traffic information.
0
raffic
NOTE: You can only access the
traffic information if the nüvi
is connected to an FM traffic
receiver.
To power outlet
in vehicle
Power
Status
LED
LED
NOTE: If your FM TMC traffic
receiver has an antenna with
suction cups on it, route the
antenna on your windshield
vertically using the suction cups.

LED Blink Codes

The green Power LED lights when
connected to external power. The Status
LED indicates the signal reception:
• Yellow dot-dash flashes:
determining which country you
are currently in.
• Yellow solid: searching for signal.
nüvi 700 Series Owner's Manual
To power
connector on
nüvi cradle