If you are using a traffic receiver, you can view traffic information on your nüvi.
When a traffic message is received, your nüvi displays the incident on the map, and
you can change your route to avoid the traffic incident. For traffic data coverage areas,
refer to the Garmin Web site at www.garmin.com/fmtraffic.
note: The FM traffic receiver and nüvi must be in data range of an FM station
transmitting traffic data to receive traffic information.
note: Garmin is not responsible for the accuracy of the traffic information. The
FM traffic receiver simply receives signals from the traffic service provider and
displays that information on your nüvi.
note: You can only access the traffic information if the nüvi is connected to an
FM traffic receiver.
Connecting the FM Traffic Receiver
1. Place your nüvi into the mount, and plug it into the 12/24-Volt adapter.
2. Plug the mini-USB cable from the FM traffic receiver into the USB connector
on the side of the nüvi.
nüvi 310/360 Owner's Manual
U
fM T
sinG
Connecting the FM Traffic Receiver
u
fm tmc t
sInG an
raffic
r
raffIc
eceIver
31