Mounting The Nüvi On The Windshield - Garmin nvi 310 Owner's Manual

G s
ettInG tarted
Mounting the nüvi on the Windshield
Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit
drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or
friction mounting options should be used.
If you want to mount the nüvi on your dashboard instead, see
To mount the nüvi using the suction cup mount:
1. Plug the power cable into the back of the mount. Plug the other end into a
12/24-Volt receptacle in your vehicle.
2. Clean and dry your windshield and the suction cup with a lint-free cloth. Place
the suction cup on the windshield.
3. Flip the lever back, toward the windshield.
4. Flip up the GPS antenna. Fit the bottom of your nüvi into the cradle.
5. Tilt the nüvi back until it snaps into place.
➊
If you use an external microphone (optional), plug it into the right side of the cradle.
To remove your nüvi from the cradle, press the small tab on the bottom of the cradle
up, and tilt the nüvi forward.

➋
Windshield
➌
page 52.
➎
Microphone
jack
➍
nüvi 310/360 Owner's Manual