Bobbin Winding; Removing Bobbin - Kenmore Sears 385.12216 Owner's Manual

Bobbin Winding
= Removing Bobbin Case
Remove the extension table from the machine by
pulling it to the left, Open the shuttle cover by pull-
ing down the embossed part of the left of the cover°
Raise needle to its highest position by rotating
handwheel toward you,
To remove bobbin case from the shuttle, pull open
latch of bobbin case° Pull bobbin case straight out
of shuttle.
\
• Bobbin Winding
(_ Release clutch by turning clutch knob inside the
handwheel toward you to stop the needle from
moving while you wind the bobbin,,
¢-
J
o
18