Access Email And Data Services On Cdma Networks; Status Messages - HTC EVO Design 4G User Manual

5. Do any of the following:
 Touch Available GSM networks > Select automatically.
 To manually select a wireless network that supports Sprint International GSM Data
Roaming, touch Available GSM networks > Search networks, and then touch the
specific operator.

Access Email and Data Services on CDMA Networks

If data service is available on a CDMA network, then you only need to set the phone to CDMA;
you will not need to select the specific carrier. Selecting a specific carrier is only necessary for
providers on the GSM network. If your device has automatically selected a GSM network while
traveling, then you will need to set the phone to CDMA to access CDMA data services. (See
Enable Global Roaming
country.

Status Messages

You may receive status messages under certain conditions. Before contacting Sprint Worldwide
Customer Support, note the message, numeric code, and the conditions under which it
appeared. The following table lists and describes the status messages.
Status Messages
Number Not in Service
User Not Available
User Not Authorized
Please Try Later
Service Restricted
Service Not Available
Energency Calls Only
System Busy. Try Later
Service Conflict
Please Try Again
Self Check Error
Self Check Fail
Sprint Worldwide Wireless Service
Mode.) Visit sprint.com/sww
Message Description
The number that you entered is not valid.
The phone that you called is either busy, out-of-range, or
turned off. Please try again later.
The phone that you called is either busy, out-of-range, or
turned off. Please try again later.
This service is temporarily not available. Please try again later.
Service may not be activated properly. Please contact Sprint
Customer Service to report the issue for resolution.
This feature is not available on the current network.
Either the service is not activated properly or the current
network is available for emergency calling only. Adjust your
network settings to check for other available networks. If
service is still not available after adjusting the settings, contact
Sprint Customer Service to report the issue for resolution
The system is experiencing heavy traffic. Please try again later.
This service cannot be enabled because an incompatible
service has already been turned on.
An error occurred. Note the error code and try again.
A fault was detected with your device. If this error recurs, note
the error and contact Sprint Customer Service.
An operational fault was detected with your device. Note the
numeric code, turn your device off, and contact Sprint
for a list of services available in each
249