To Set Up Frequency-Shift Keying Modulation (Fsk) - Agilent Technologies InfiniiVision 3000 X-Series User Manual

To set up Frequency-Shift Keying Modulation (FSK)

In the Waveform Generator Modulation Menu (under [Wave Gen] > Settings >
Modulation):
1 Press the Type softkey and turn the Entry knob to select Frequency-Shift
2 Press the Hop Freq softkey and turn the Entry knob to specify the "hop
3 Press the FSK Rate softkey and turn the Entry knob to specify the rate
The following screen shows an FSK modulation of a 100 kHz sine wave
carrier signal.
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Keying Modulation (FSK).
frequency".
The output frequency "shifts" between the original carrier frequency and
this "hop frequency".
at which the output frequency "shifts".
The FSK rate specifies a digital square wave modulating signal.
Waveform Generator
17
273