Making Measurements
Using the keys
Single press
34450A User's Guide
The following pages show how to make measurement
connections and how to select measurement functions from
the front panel for each of the measurement functions.
For remote operation, refer to the MEASure Subsystem in
the Agilent 34450A Online Programmer's Reference Helpfile.
The meter functions and operations can be selected by
pressing the buttons located on the front panel; see
Keypad at a Glance"
which the buttons are used to select the functions and
operations. The ways to use the buttons are shown below:
>
Press one button after another
Getting Started Tutorial
on page 6. There are different ways in
1
"The
Press twice
11