Table of Contents
Advertisement
Navigating to a Point of Interest
You can search for specific types of locations.
1
From the home screen, select Where To? > Search Tools >
POI Categories.
2
Select a category.
3
Select a point of interest.
4
Select RIDE.
Setting the Search Location
By default, the device searches for points of interest, saved
locations, and saved routes near your current location. You can
set the device to search near a different location.
1
From the home screen, select Where To? >
2
Select a search area.
3
If necessary, select a location.
4
If necessary, select Use.
Saving Your Location
You can save your present location, such as your home or
parking spot.
From the home screen, select
Location >
.
Navigating to an Address
1
From the home screen, select Where To? > Search Tools >
Addresses.
2
Follow the on-screen instructions.
3
Select RIDE.
Navigating to a Recent Location
1
From the home screen, select Where To? > Recent Finds.
2
Select a location.
3
Select RIDE.
Navigating to a Saved Location
Before you can navigate to a saved photo, you must transfer a
geotagged photo to your device
1
From the home screen, select Where To? > Saved >
Locations.
2
Select a location.
3
Select RIDE.
Navigating to a Saved Photo
Before you can navigate to a saved photo, you must transfer a
geotagged photo to your device
1
From the home screen, select Where To? > Saved >
Photos.
2
Select a photo.
3
Select RIDE.
Saving Locations from the Map
1
From the home screen, select View Map >
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select
>
to save the location.
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
From the home screen, select Where To? > Saved >
Locations.
2
Select a location.
3
Select the location information at the top of the screen.
ANT+™ Sensors
.
> System > GPS > Mark
(page
4).
(page
4).
.
4
Select
> Project Location.
5
Enter the bearing and distance to the projected location.
6
Select
.
Editing Locations
1
From the home screen, select Where To? > Saved >
Locations.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select
.
5
Select an attribute.
For example, select Change Elevation to enter a known
altitude for the location.
6
Enter the new information, and select
Deleting a Location
1
From the home screen, select Where To? > Saved >
Locations.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select
> Delete Location >
Creating a Course from History
You can create a new course from a previously saved ride.
1
From the home screen, select
2
Select a ride.
3
Select
.
4
Enter a name for the course, and select
Riding a Saved Course
Before you can ride a saved course, you must record a ride
(page
2) and create a course from the ride
1
From the home screen, select Where To? > Saved >
Courses.
2
Select a course.
3
Select RIDE.
Editing the Course Settings
1
From the home screen, select Where To? > Saved >
Courses.
2
Select a course.
3
Select Settings.
4
Select an option:
• To change the name of the course, select Name.
• To set the device to warn you when you have left the
route, select Off Course Warnings.
Stopping Navigation
From the map page, select
ANT+™ Sensors
The Edge Touring Plus can be used with a wireless ANT+ heart
rate monitor or ANT+ enabled eBike.
Pairing a Heart Rate Monitor
Before you can pair, you must put on the heart rate monitor.
1
Bring the device within range (3 m) of the heart rate monitor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Select
> Heart Rate Monitor > Enable > Search.
.
.
> Rides.
.
(page
3).
.
3
Hide quick links:
Advertisement
Table of Contents
