Configuring Snmp; The Dns Screen - ZyXEL Communications P-660N-T1A User Manual

Chapter 16 Remote Management

16.5.3 Configuring SNMP

To change your ZyXEL Device's SNMP settings, click Advanced > Remote MGMT
> SNMP tab. The screen appears as shown.
Figure 93 Advanced > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 65 Advanced > Remote MGMT > SNMP
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Cancel

16.6 The DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP
address and vice versa. Refer to
information.
Use this screen to set from which IP address the ZyXEL Device will accept DNS
queries and on which interface it can send them your ZyXEL Device's DNS
settings. This feature is not available when the ZyXEL Device is set to bridge
184
DESCRIPTION
The SNMP agent listens on port 161 by default. If you change the SNMP
server port to a different number on the ZyXEL Device, for example
8161, then you must notify people who need to access the ZyXEL Device
SNMP agent to use the same port.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
A secured client is a "trusted" computer that is allowed to access the
SNMP agent on the ZyXEL Device.
Select All to allow any computer to access the SNMP agent.
Choose Selected to just allow the computer with the IP address that you
specify to access the SNMP agent.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 7 on page 85 for background
P-660N-T1A User's Guide