ZyXEL Communications P-660N-T1A User Manual page 199

802.11n wireless adsl2+ gateway
Hide thumbs Also See for P-660N-T1A:
Table of Contents

Advertisement

Table 69 Advanced > CWMP (continued)
LINK
Password
Connection
Request
Path
Port
UserName
Password
Periodic
Inform
Interval
Apply
Cancel
P-660HN-T1A User's Guide
DESCRIPTION
The password is used to authenticate the ZyXEL Device when making a
connection to the management server. This password on the management
server and the ZyXEL Device must be the same. Type a password of up to
255 printable characters found on an English-language keyboard.
Use this part of the screen to allow the management server to connect to
the ZyXEL Device after a successful login.
Type the IP address or domain name of the ZyXEL Device. The
management server uses this path to verify the ZyXEL Device.
The default port for access to the ZyXEL Device from the management
server is the HTTP port, port 80. If you change it, make sure it does not
conflict with another port on your network and it is recommended to use a
port number above 1024 (not a commonly used port). The management
server should use this port to connect to the ZyXEL Device. You may need
to alter your NAT port forwarding rules if they were already configured.
The user name is used to authenticate the management server when
connecting to the ZyXEL Device. Type a user name of up to 255 printable
characters found on an English-language keyboard. Spaces and characters
such as @#$%^&*()_+ are allowed.
The password is used to authenticate the management server when
connecting to the ZyXEL Device. Type a password of up to 255 printable
characters found on an English-language keyboard. Spaces are not
allowed.
Select Activated to have the ZyXEL Device periodically send information to
the management server (recommended if CWMP is enabled) or select
Deactivated to not have the ZyXEL Device periodically send information to
the management server
The interval is the duration in seconds for which the ZyXEL Device must
attempt to connect with the management server to send information and
check for configuration updates. Enter a value between 1 and 86400
seconds.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 18 CWMP
199

Advertisement

Table of Contents
loading

Table of Contents