ZyXEL Communications P-660N-T1A User Manual page 63

Table 10 Wireless LAN Setup Wizard 1
LABEL
Next
Exit
Configure your wireless settings in this screen. Click Next.
3
Figure 24 Wireless LAN
The following table describes the labels in this screen.
Table 11 Wireless LAN Setup Wizard 2
LABEL
Network
Name(SSID)
Channel
Selection
Security
Back
P-660N-T1A User's Guide
DESCRIPTION
Click this to continue to the next wizard screen.
Click this to close the wizard screen without saving.
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the ZyXEL Device, make sure all wireless
stations use the same SSID in order to access the network.
The range of radio frequencies used by IEEE 802.11b/g wireless devices is
called a channel. Select a channel ID that is not already in use by a
neighboring device.
Select Manually assign a WPA-PSK key to configure a Pre-Shared Key
(WPA-PSK). Choose this option only if your wireless clients support WPA.
See Section 5.3.1 on page 64
Select Manually assign a WEP key to configure a WEP Key. See
5.3.2 on page 65 for more information.
Select Disable wireless security to have no wireless LAN security
configured and your network is accessible to any wireless networking
device that is within range.
Click this to return to the previous screen without saving.
Chapter 5 Internet and Wireless Setup Wizard
for more information.
Section
63