Mac Filter - ZyXEL Communications P-660N-T1A User Manual

Chapter 8 Wireless LAN

8.2.6 MAC Filter

Use this screen to change your ZyXEL Device's MAC filter settings. Click the Edit
button in the AP screen. The screen appears as shown.
Figure 49 Network > Wireless LAN > AP: MAC Address Filter
The following table describes the labels in this screen.
Table 30 Network > Wireless LAN > AP: MAC Address Filter
LABEL
Active MAC
Filter
Filter Action
Set
MAC
Address
108
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Deny to block access to the ZyXEL Device. MAC addresses not listed
will be allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device. MAC addresses not
listed will be denied access to the ZyXEL Device.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless devices that are allowed or denied
access to the ZyXEL Device in these address fields. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character
pairs, for example, 12:34:56:78:9a:bc.
P-660N-T1A User's Guide