Advanced Configuration - ZyXEL Communications NBG4604 User Manual

The following table describes the labels in this screen.
Table 57 Management > Bandwidth MGMT > General
LABEL
Service Management
Bandwidth
Management
Type
Total Bandwidth Setting. The fields below appear when you enable Bandwidth
Management.
Uplink
Downlink
Apply
Reset

16.5 Advanced Configuration

Use this screen to configure bandwidth managements rule for the pre-defined
services or applications.
Use this screen to configure bandwidth managements rule for specific protocols on
an IP or IP range.
Note: This screen contains the Priority Queue and Bandwidth Allocation tables.
Though both tables are described in this section, you can only apply the rules in
one table. Fill out the table of the Bandwidth Management Type you selected
in Section 16.4 on page
NBG4604 User's Guide
DESCRIPTION
This field allows you to have NBG4604 apply bandwidth management.
Select Priority Queue or Bandwidth Allocation to enable
bandwidth management.
• Select Priority Queue to allocate bandwidth based on the pre-
defined priority assigned to an application. Refer to
page 153.
• Select Bandwidth Allocation allocate specific amounts of
bandwidth to specific protocols on an IP or IP range. Refer to
Section 16.5 on page
Select Disable if you do not want to use this feature.
Type or select the total amount of bandwidth (from 64 Kbps to 30
Mbps) that you want to dedicate to uplink traffic.
If you type the amount of bandwidth, the selection automatically
becomes User Defined. If you select the amount of bandwidth, the
field automatically displays the value in Kbps.
This is traffic from LAN/WLAN to WAN.
Type or select the total amount of bandwidth (from 64 Kbps to 30
Mbps) that you want to dedicate to downlink traffic.
If you type the amount of bandwidth, the selection automatically
becomes User Defined. If you select the amount of bandwidth, the
field automatically displays the value in Kbps.
This is traffic from WAN to LAN/WLAN.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
152.
Chapter 16 Bandwidth Management
153.
Section 16.5 on
153