Using The Capacitive Touchscreen - Fujitsu Stylistic Q702 User Manual

Using the Capacitive Touchscreen

Certain configurations of this Hybrid Tablet have an optional dual digitizer that allows you to use either the stylus or
your finger(s) as a pointing device. This type of display also allows you to use "gestures" to perform such actions as
scroll, zoom, and rotate.
G
•
ESTURE SUPPORT IS DETERMINED BY THE APPLICATION IN USE
T
•
HE STYLUS TAKES PRECEDENCE OVER FINGER TOUCH
W
•
HEN ONE FINGER IS USED ON THE TOUCHSCREEN
Right-clicking the touchscreen
To perform a right-click action using two fingers, press the first finger at the location you want to perform a right-click,
then quickly tap and release the second finger on the screen.
Gesture Mode
To initiate gesture mode, two fingers must touch the screen within 200 ms of each other. If the second finger touches
the screen after 200 ms has elapsed, the second finger is ignored. If more than two fingers touch the screen in that
time, Advanced Gesture Mode is activated instead. When Gesture Mode is activated, no cursor movement is sent to
the system.
When both fingers are removed, Gesture mode ends. When a third finger is added, gesture mode ends and Advanced
gesture mode is activated. Note that if a gesture can't be recognized, no action is taken. In that case, remove both
fingers from the screen and try again.
Scrolling Gesture
To scroll through long documents or on a web page, place both fingers on the screen (one finger quickly followed by
the second). If at least one finger has moved at least 3 mm, a scroll is considered. If both fingers are moving in the
same direction and parallel (given a tolerance of 5 mm), Scroll Mode is activated. If one finger is stationary, it is not
considered a scroll. If either finger is lifted, Scroll Mode is canceled.
.
. I
F THE STYLUS IS WITHIN ACTIVE RANGE OF THE SCREEN
,
IT BEHAVES IN THE SAME MANNER AS A STYLUS
29 - Active Digitizer/Touchscreen
,
FINGER TOUCH WILL BE DISABLED
.
.