Touchscreen - Fujitsu STYLISTIC R727 Operating Manual

Touchscreen

Notes Touchscreen
Information on screen resolution can be found in the section
for integrated screen and external screens", Page
Background lighting
LCD screens are operated with background lighting. The luminosity of the background
lighting can decrease over the period of use of the Tablet PC. However, you
can set the brightness of your screen yourself.
Ambient light sensor
If your Tablet PC was shipped with the Windows operating system, the screen brightness is
regulated by means of the ambient light sensor and depending on the respective light conditions.
This results in optimum readability and longer battery life at the same time.
If your Tablet PC was shipped with Windows 10, the adaptive brightness setting is deactivated. To
change the ambient light sensor settings, select Control Panel - System and Security - Power Options -
Change plan settings - Change advanced power settings - Display - Activate adaptive brightness setting..
Select On to activate the adaptive brightness setting with the help of the ambient light sensor.
Synchronizing the display on the touchscreen and an external monitor
In Windows 10 you can proceed as follows to set the output type:
► Wipe your finger over the screen starting from the right-hand edge.
► Select All Settings.
► Look for the keyword "project".
► Select the required function.
Fujitsu
Working with the Tablet PC
"Screen resolutions
83.
27