Fujitsu Stylistic Q702 User Manual page 60

Problem
You turn on your Hybrid Tab-
let and nothing seems to
happen.
(continued)
Your STYLISTIC Hybrid Tablet
turns off all by itself.
Your Hybrid Tablet will not
work on battery alone.
The battery seems to
discharge too quickly.
Possible Cause
AC power adapter is not plugged
in properly.
The power adapter has no power
from the AC or airline outlet.
The power adapter is faulty.
The power management param-
eters are set for auto timeouts
which are too short for your
operating needs.
Your power adapter has failed or
lost its power source.
You ignored a low battery alarm
until the battery entered Dead
Battery Suspend mode.
You have a battery failure.
The installed battery is dead.
No battery is installed.
Battery is improperly installed.
Your installed battery is faulty.
The power savings features may
be disabled.
The brightness is turned all the
way up.
Possible Solutions
Verify that your adapter is connected correctly.
Move the AC cord to a different outlet, or check for a line switch or tripped circuit
breaker. If you are using an auto/airline adapter in a car be sure the ignition switch is
in the On or Accessories position.
Try a different power adapter.
Move the mouse to restore operation. If that fails, push Power/Suspend/Resume
switch. Check your power management settings, or close your applications and go to
Power Options located in the Control Panel to adjust timeouts to better suit your
needs.
Make sure the adapter is plugged in and the outlet has power.
Install a power adapter, then push the Power/Suspend/Resume switch.
Sources" on page 36.
Verify the condition of the battery using the Status Indicator panel. If the battery is
See "Status Indicator Panel" on page 20.
shorted, replace or remove it.
Replace the battery with a charged one or use an adapter.
Install a charged battery.
Verify that the battery is properly connected by re-installing it.
Verify the condition of the battery using the Status Indicator panel and replace or
remove any batteries that are shorted.
Check the Power Options menu settings and adjust according to your operating
needs.
Turn down the brightness adjustment. The higher the brightness the more power
your display uses.
59 - Troubleshooting
See "Power Sources" on page 36.
See "Status Indicator Panel" on page 20.
See "Power