Garmin 400/500 Owner's Manual page 45

To copy the built-in maps to an SD card:
1. Insert an SD card (at least 4 GB) into the SD card slot on the
front of the unit.
2. From the Home screen, select
Transfer > Copy Built-In Map
your chartplotter to the SD card.
To transfer data to or from a NMEA 2000 network:
1. Connect the unit to a NMEA 2000 network. (Refer to the
GPSMAP 400/500 Installation Instructions.)
Only the following units are NMEA 2000 compatible:
GPSMAP 441/441s GPSMAP 536/536s
GPSMAP 541/541s GPSMAP 546/546s
2. From the Home screen, select
Transfer > Network.
3. Complete one of the following:
• Select Clone User Data
and tracks to other chartplotters connected to the network.
Existing data is overwritten on those chartplotters.
• Select Merge User Data
chartplotters connected to the network. Unique data is
combined with existing data on every chartplotter.
GPSMAP 400/500 Series Owner's Manual
Information > User Data >
to copy the maps loaded onto
Information > User Data >
to transfer waypoints, routes,
to transfer data between all the
To back up data to a computer:
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, select
Data Transfer > Save To
Note: If your unit is NMEA 2000 compatible, select
of Save To Card.
3. Complete one of the following:
• Select the file name from the list.
• Select Add New File
using the Rocker, and press SELECT.
4. Remove the SD card from the unit, and insert it into an SD card
reader attached to a computer.
Data
5. From Windows
®
the SD card.
6. Copy the appropriate .ADM file on the card, and paste it to any
location on the computer.
To restore backup data to your chartplotter:
1. Copy the appropriate .ADM file from the computer to an SD card
in the Garmin\UserData folder.
2. Insert the SD card into your chartplotter.
3. From the Home screen on your chartplotter, select
User Data > Data Transfer
Information >
Card.
to create a new file. Enter the file name
Explorer, open the Garmin\UserData folder on
> Replace From
Viewing Information
User Data > Data
Card
instead
Information >
Card.
39