Creating And Using Routes - Garmin 400/500 Owner's Manual

Where To?
To delete a waypoint or an MOB:
1. From the Navigation chart, use the map pointer (
the waypoint or the MOB on the Navigation chart.
OR
From the Home screen, select
Waypoints.
2. Select the waypoint or the MOB you want to delete.
3. Select Review > Delete (The
more than one waypoint is in the vicinity.)

Creating and Using Routes

You can create and store up to 20 routes (100 routes for models
GPSMAP 431/441/531/541/536/546, including "s" models), with up
to 250 waypoints each.
To create a route from your present location:
1. From the Navigation chart, use the map pointer (
your destination.
2. Select Navigate To > Route
3. Use the map pointer ( ) to select the location at which you
want to make the last turn toward your destination.
4. Press SELECT. Repeat this step to add additional turns.
30
) to highlight
Information > User Data >
Review button is only shown when
) to select
To.
5. Press MENU to cancel, to undo the last turn, or to begin
navigating the route.
To create a route in another location:
1. From the Home screen, select
Routes > New Route.
2. Select Use Chart or Use Waypoint
3. If you select Use Chart, use the map pointer (
initial location at which you want to start the new route. If you
select Use Waypoint List, select the first waypoint on the route.
4. Choose the location of the first turn and press SELECT. Repeat
until the route is complete.
Information > User Data
List.
) to select the
GPSMAP 400/500 Series Owner's Manual
>