Clarion WXZ468RMP Owner's Manual page 24

Common Operations
Display Adjust Mode
Setting the sensitivity of the
spectrum analyzer display
∗ The factory default setting is "MID".
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select "S/A
SENSE".
3. Turn the [A-MODE] knob to select from
"LOW", "MID" or "HIGH".
4. Press the [DISP] button to return to the previ-
ous mode.
Setting the speed of the spectrum
analyzer display
∗ The factory default setting is "MID".
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select "S/A
SPEED".
3. Turn the [A-MODE] knob to select from
"LOW", "MID" or "HIGH".
4. Press the [DISP] button to return to the previ-
ous mode.
Turning the screen saver function
on or off
If the screen savers are not desired, they can be
turned off.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is "ON".
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select "SCRN
SVR".
3. Turn the [A-MODE] knob to select "ON" or
"OFF".
4. Press the [DISP] button to return to the previ-
ous mode.
24
WXZ468RMP
Entering MESSAGE INFORMATION
When "ON" is selected for the screen saver set-
ting, you can change the contents of the mes-
sage.
∗ Up to 30 characters can be entered.
∗ The factory default setting is "Welcome to
Clarion".
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select
"MSG INPUT".
3. Press the [SEARCH] knob.
4. Turn the [SEARCH] knob to move the cursor.
5. Press the [BAND] button to select a
character. Each time you press the [BAND]
button, the character changes in the
following orders:
Capital letters Small letters
and Symbols Umlaut
6. Turn the [A-MODE] knob to select the de-
sired character.
7. Repeat steps 4 to 6 to enter up to 30 charac-
ters for message.
8. Press and hold the [SEARCH] knob for 2
seconds or longer to store the message in
memory and return to the display adjust
mode.
∗ Press and hold the [BAND] button for 1
second or longer to delete the message. Then
press and hold the [SEARCH] knob for 2
seconds or longer to return the message to
the default setting.
9. Press the [DISP] button to return to the previ-
ous mode.
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is "ON".
1. Press and hold the [DISP] button for 1 sec-
ond or longer to switch to the display adjust
mode.
2. Turn the [SEARCH] knob to select "AUTO
SCROLL".
Numbers
Capital letters...