Common Operations - Clarion WXZ468RMP Owner's Manual

Common Operations

CATS function (Clarion Anti-
Theft System)
This unit can deter theft by checking registered
optional PIN (Personal Identification Number).
How to register/delete PIN
1. Press the [ADJ] button to switch to the adjust
mode.
2. Turn the [SEARCH] knob to select "CODE".
3. Press the [SEARCH] knob.
∗ When registering: "ETRY 0000" appears.
∗ When deleting: "DEL 0000" appears.
4. Press the [DIRECT] buttons to input optional
PIN in 4 digits.
CAUTION
• Establish your PIN by combining numbers
from 1 to 6 as you like in 4 digits.
Do not forget your PIN, for you cannot per-
form any further operation without your
PIN when you remove the battery for repair
etc.
• Write down your PIN for the future use.
5. Press and hold the [SEARCH] knob for 2
seconds or longer to enter the PIN.
Note:
• When registering PIN is completed, the unit en-
ters the CATS mode. If ACC is set to ON from
OFF or if the power is turned on while in the
CATS mode, "CODE" appears in the display for 2
seconds and the unit starts up.
If you input wrong number when deleting your
PIN, you cannot complete the operation. In that
case, the unit requests you to input the correct
PIN.
6. Press the [ADJ] button to return to the previ-
ous mode.
PIN (Personal Identification
Number) check in the CATS Mode
When the main power source is unconnected
for battery exchange etc. while the CATS mode
is on, input your PIN.
1. Press the [DIRECT] buttons to input your
PIN in 4 digits.
CAUTION
• If you input your PIN wrongly, "----" is to be
displayed and CATS lock mode is to be en-
tered. You cannot perform any operation
for a given period while in the CATS lock
mode.
If your mistakes are less than 6 times, the
locking time will be for 15 seconds; if more
than 7 times, it will be for 15 minutes.
• If you forget your PIN and enter a wrong
PIN, you cannot perform any further opera-
tion.
23
WXZ468RMP