Digital Radio/Dab Operations - Clarion WXZ468RMP Owner's Manual

Digital Radio / DAB Operations
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH923) (sold separetely), all func-
tions can be operated.
Listening to the DAB station
1. Turn the [SOURCE] knob to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel
Switching the display
1. Each time you press the [TITLE] button, the
display switches in the following order:
S-LABEL PTY
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Turn the [SOURCE] knob to select the DAB
mode.
2. Turn the [SEARCH] knob for 1 second or
longer.
"DAB" lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Turn the [SOURCE] knob to select the DAB
mode.
2. Press and hold the [BAND] button for 1 sec-
ond or longer. "MANU" lights up in the dis-
play.
3. Turn the [SEARCH] knob to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
32
WXZ468RMP
service label
Switching programmes
1. Turn the [SOURCE] knob to receive a DAB
station.
2. Turn the [SEARCH] knob to switch
programmes in the DAB station.
Note:
• The programme name may be the same depend-
ing on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Turn the [SOURCE] knob to receive a DAB
station.
2. Perform the following operation depending
on the connected model.
Press the [SEARCH] knob. "SERVICE SCN"
lights up and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [SEARCH] knob.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Turn the [SOURCE] knob to select the DAB
mode.
2. Press the [BAND] button to select any one
shown above.
3. Turn the [SEARCH] knob to select a desired
programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.