Threading The Machine - Kenmore 385.190011890 Service Manual

SEWING MACHINE DIV. 20 MODEL 385.19001890
THREADING THE MACHINE
RAISE THE PRESSERFOOT LIFTER, A ND PASSTHE THREAD THROUGH POINTS (I) TO (6).
(1) HOLD THE UPPER THREAD AND PASS THE THREAD UNDER THE THREAD GUIDE. PULL THE
THREAD DOWN ALONG THE GROOVE.
(2) DRAW THE THREAD AROUND THE CHECK SPRING HOLDER FROM RIGHT TO LEFT,THEN
PULL UP THE THREAD.
(3) FIRMLY DRAW THE THREAD FROM RIGHT TO LEFTAND PULL IT TOWARD YOU INTO THE
EYE OF THE THREAD TAKE-UP LEVER,THEN DOWN TO THE LOWER THREAD GUIDE.
(4) DRAW THE THREAD FROM RIGHT TO LEFTBEHIND THE LOWER THREAD GUIDE.
(5) SLIDE THE THREAD BEHIND THE NEEDLE BAR THREAD GUIDE FROM THE LEFT.
(6) THREAD THE NEEDLE FROM FRONT TO BACK USING THE NEEDLE THREADER.
(3) ; (1)
(6)
(5)
16
(4)
J
J