Winding Thebobbin - Kenmore 385.190011890 Service Manual

SEWING MACHINE DIV. 2 0 MODEL 385.19001890
WINDING THEBOBBIN
(1) PASS THE THREAD AROUND THREAD GUIDE.
(2) THEN THROUGH THE HOLE IN THE BOBBIN.
(3) PUT THE BOBBIN ON THE BOBBIN WINDER SPINDLE, AND PUSH THE BOBBIN TO THE RIGHT.
(4) WHEN THE BOBBIN IS FULLYWOUND, ITWILL STOP AUTOMATICALLY. RETURNTHE BOBBIN
WINDER TO ITSORIGINAL POSITION BY MOVING THE SPINDLE TO THE LEFT,AND CUT THE
THREAD AS SHOWN.
/
I
• INSERTING THE BOBBIN
(2)
(1)
PLACE THE BOBBIN IN THE BOBBIN HOLDER WITH THE
THREAD RUNNING OFF IN THE COUNTERCLOCKWISE
DIRECTION.
(1) END OF THREAD
• (2)
GUIDE THE THREAD INTO THE NOTCH (A) ON THE FRONT
SIDE OF THE BOBBIN HOLDER.
DRAW THE THREAD TO THE LEFT,SLIDING IT BEIWEEN THE
TENSION SPRING BLADES,
(2) NOTCH (A)
CONTINUE TO DRAW THE THREAD LIGHTLY UNTIL THE
THREAD SLIPSINTO NOTCH (B).
PULL OUT ABOUT 15 CM (6") OF THREAD.
(3) NOTCH (B)
(4)
ATTACH THE HOOK COVER PLATE.
CHECK THE THREADING BY REFERRING TO THE CHART
SHOWN ON THE HOOK COVER PLATE,
(4) THREADING CHART
15