Dell XPS M1710 Service Manual page 48

1 USB-port-board 3 speaker connectors (2)
connector
2 subwoofer connector 4 cable connector for internal card with Bluetooth wireless
technology
12. Disconnect the smart-card reader connector from the system board.
13. Disconnect the speaker connectors from the system board.
14. Disconnect the connector for the internal card with Bluetooth® wireless technology from the system board.
15. Disconnect the subwoofer connector from the system board.
16. Disconnect the USB-port-board connector from the system board.
17. Disconnect the fan connector(s) from the system board.
NOTE: It is not required but is highly recommended that you remove the system fan(s) (see
18. Remove the video card/thermal-cooling assembly, if present (see
NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling unit (heat sink) from the video card.
19. Remove the processor thermal-cooling assembly (see
20. Remove the processor (see Removing the Processor
21. Remove the docking frame:
a. Remove the remaining docking-frame screw.
b. Lift the docking frame away from the system board.
1 docking frame
Removing the Processor Thermal-Cooling
Module).
2 docking frame screw
System
Removing the Video Card/Thermal- Cooling
Assembly).
Fan(s)) to allow easier access to the system board.
Assembly).