Dell XPS M1710 Service Manual page 10

1 Mini-Card 2
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
5. Install the replacement Mini-Card:
a. Align the Mini-Card with the connector at a 45-degree angle, and press the Mini-Card down into the securing clips until the card clicks into place.
1 triangles (2) 2 Mini-Card connector
4 securing clips (2)
NOTICE: To avoid damaging the Mini-Card, never place cables under the card.
NOTE: If you are installing a Mini-Card for the first time, you will find a clear plastic protective sleeve on each antenna cable connector. Before you
connect the antenna cables to the Mini-Card, slide the sleeves off of the cable connectors.
b. Connect the antenna cables to the antenna connectors on the Mini-Card by matching the color of the cable to the color of the triangle beside the
connector. Connect the main antenna cable (white) to the antenna connector with the white triangle. Connect the auxiliary antenna cable (black)
to the antenna connector with the black triangle.
NOTE: If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available on your card.
6. Replace the Mini-Card cover.
securing clips (2)
3 antenna connectors (2)