Init Display First; Reset Configuration Data; Resources Controlled By; Maximum Payload Size - Intel MI910F User Manual

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility

Init Display First

Reset Configuration Data

Resources Controlled By

IRQ Resources
PCI/VGA Palette Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
**PCI Express relative items**

Maximum Payload Size

Init Display First
The default setting is PCI Card.
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
with the use of a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 4096.
MI910 User's Manual
PnP/PCI Configurations
PCI Slot
Disabled
Menu Level
Auto (ESCD)
Select Yes if you are
Press Enter
using a Plug and Play
capable operating
Disabled
system Select No if
Auto
you need the BIOS to
Auto
configure non-boot
Auto
devices
Auto
Auto
Auto
Auto
Auto
4096
BIOS SETUP
ITEM HELP
45