2720 Troubleshooting - Garmin StreetPilot 2720 Owner's Manual

a
PPendix

2720 Troubleshooting

Problem/Question
The touch screen is not
responding to my taps.
The remote control does
not work.
How do I clear all my
user data?
I need to reset my 2720.
Be sure you load the USB drivers before you connect the USB cable. See
EN-2
Calibrate the screen. Press
Settings > Display > Recalibrate. Follow the on-screen instructions.
Check that two AAA batteries are installed.
Check the polarity of the batteries (+ and -).
Install fresh batteries.
Aim the front of the remote toward the IR port on the front of the 2720.
Turn off the StreetPilot and then turn it back on. During start up, press and
hold the Find key on the front of the 2720. Keep pressing
message "Do you really want to erase all user data?" appears. Touch
clear all user data.
All original settings are restored. Your recent finds are also deleted.
Solution/Answer
Menu on the remote. Use the remote to select
Tip
page 36
Find until the
Yes
for information.
StreetPilot 2720 Owner's Manual
to