Konica Minolta DI2510 Advanced Information page 289

Touch Panel Messages
4
If the punch kit is installed:
Pull out the punch box.
5
Lower lever "FN3", and then pull out
any misfed paper.
6
Return lever "FN1" and lever "FN3"
to their original position.
7
If the punch kit is installed:
Insert the punch box into its original
position.
8
Lower lever "FN4".
9
Turn dial "FN5" or dial "FN6", and
then pull out any misfed paper.
10
Return lever "FN4" to its original
position.
11
Close the front door.
Di2510/Di3010/Di3510
12
12-23